Saturday, May 8, 2010

Keeping Your Silver Clean

Keeping silver free and clean from tarnish can be a challenge. A good quality paste silver polish generally can be found at your local hardware store. In a pinch, baking soda may be used. Pour a some into a saucer. Dab it with a soft damp cloth. Rub gently on the silver. Be very careful that you do not scratch the suface! Rinse thoroughly with cold water. Pat dry with clean, soft cloth.

DO NOT USE AMMONIA! It will pit and blacken your silver!
DO NOT SWIM IN CHLORINATED POOLS OR ALLOW CHLORINE to touch your jewelry. Chlorine with dissolve it, little by little.

And, as general rule, never go into a pool with any jewelry, or anything loose. It can:
a) come off and go into the drain
b) if you're in it, YOU can get stuck

To prevent build-up of tarnish, when piece is clean (brand new, BEFORE it's worn) paint item with clear nail polish, on one side. Let dry thoroughly. Do other side.

And for good measure, when it's not being used, store your silver in an air-tight container, like a baggie. The next time you are at your favorite jewelry store buying silver, ask your jeweler for some anti-tarnish strips, so that you can keep yout silver shiny.

Kind Regards,

Anne
www.beadbear.com

No comments:

Post a Comment

Followers